หมวดสินค้า

Showing 1–10 of 281 results

  1. Fluke 1000FLT

        Performs all essential lamp tests in less than 30 seconds Maintaining fluorescent lamps tends to be a trial-and-error process. Bulbs not lit? Climb the ladder and replace them. Still not lit? Go back up the ladder and replace the ballast. Still not lit? Climb the ladder one more time. It’s tedious, time-consuming, and inefficient, plus any time workers climb ladders there are potential safety issues. 
        The Fluke® 1000FLT Fluorescent Light Tester eliminates the guesswork of maintaining fluorescent lamps by performing all the essential tests on lamps in less than 30seconds: lamp tester, ballast tester, non-contact voltage detector, pin continuity tester, and ballast discriminator. The 1000FLT eliminates trial, error, and rework, and reduces the time maintenance teams spend fixing lights. 
        The point-and-shoot ballast discriminator in the1000FLT speeds the replacement of old magnetic ballasts with new energy-efficient electronic models by quickly identifying exactly what type of ballast is in the fixture before they climb the ladder. There is no need to remove the bulbs or to make contact with live circuitry. Simply point the 1000FLT fluorescent light tester at the glowing bulb and determine the ballast type.  The tester comes with a rugged, metal test rod that extends up to 31 inches (79 cm) eliminating the need to climb a ladder for many tests, and a belt-style holster so the tester is always within easy reach. 

    Remark Please identify each quotation when ordering.
    11,421.00 ฿

  2. Fluke 113

    The Fluke 113 has significant improvements over other digital multimeters available on the market. Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities.
    • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
    • True-rms for accurate ac measurements on non-linear loads
    • A large backlit display allows for easy visibility in low-lit areas
    • Record signal fluctuations using the Min/Max function
    • Diode test for testing general-purpose germanium, silicon, and power diodes
    • Integral holster with probe holders for easy storage
    • Auto and Manual ranging for added user functionality
    • Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
    • The optional TPAK magnetic hanger allows the user hands- free flexibility

    Remark  Please identify each quotation when ordering.
    6,853.00 ฿

  3. Fluke 114

    Compact true-rms meter for electrical troubleshooting. The Fluke 114  is the troubleshooting tool for “go/no-go” testing. It includes a feature  to prevent false readings caused by ghost voltage Features
    • AutoVolt: automatic ac/dc voltage selection
    • Large white LED backlight to work in poorly lit areas
    • Resistance and continuity
    • Min/Max/Average to record signal fluctuations
    • CAT III 600 V safety rated

    Remark  Please identify each quotation when ordering.
    7,784.00 ฿

  4. Fluke 115

    The Fluke 115 is the compact, general purpose troubleshooting tool for field service technicians
    For general purpose electrical and electronic test requirements, the Fluke 115 True RMS digital multimeter provides the perfect answer. Its simple, one-handed operation and compact design meets the needs of a wide variety of field service technicians. It measures True RMS voltage and current with 6000 count resolution as well as resistance, continuity, frequency and capacitance for quick verifications. Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V environments.
    Other useful features:
    • Measures resistance, continuity, frequency, and capacitance
    • Provides Min/Max/Average with elapsed time to record signal fluctuations
    • Comes with a holster with probe holders for easy storage
    • Features a compact ergonomic design for one-handed operation
    • Fits into optional ToolPak™ magnetic hanger for hands-free operation
    • CAT III 600 V safety rated

    Key features

    • General purpose digital multimeter for electrical and electronic testing
    • Ideal for quick verifications and field service
    • Presents a large white LED backlight for working in poorly lit areas
    • Measures AC and DC voltage to 600V
    • Measures AC and DC current to 10A (20 A overload for 30-seconds max)
     
    8,921.00 ฿

  5. Fluke 116

    Compact true-rms meter for HVAC (heating ventilation air conditioning) troubleshooting. . It has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.
    Feature
    • Built-in thermometer for HVAC applications
    • Microamps to test flame sensors
    • Low input impedance: helps prevent false readings due to ghost voltage
    • Large white LED backlight to work in poorly lit areas
    • Resistance, continuity, frequency and capacitance
    • Min/Max/Average with elapsed time to record signal fluctuations
    • Compact ergonomic design for one-handed operation
    • Compatible with optional magnetic hanger (ToolPak™)
    • CAT III 600 V safety rated

    Remark  Please identify each quotation when ordering.
    8,968.00 ฿

  6. Fluke 116/323

     Fluke 116/323 Multimeter and Clamp Meter kit for HVAC enables  efficient troubleshooting and problem solving. Check out the versatility  of this combination.
    Fluke 116 Digital Multimeter. Designed by Electricians. Engineered by Fluke.
    • Built-in thermometer for HVAC applications
    • Microamps to test flame sensors
    • Low input impedance: helps prevent false readings due to ghost  voltage
    • Large white LED backlight to work in poorly lit areas
    • Resistance, continuity, frequency and capacitance
    • Min/Max/Average with elapsed time to record signal fluctuations
    • Compact ergonomic design for one-handed operation
    • Compatible with optional magnetic hanger (ToolPak™)
    • CAT III 600 V safety rated
    Fluke 323 True-rms Clamp Meter. Rugged. Reliable. Precise.
    • 400 A AC current measurement
    • 600 VAC and DC voltage measurement
    • True RMS AC voltage and current for accurate measurements on  non-linear signals
    • Resistance measurement up to 40 kΩ with continuity detection
    • Slim, ergonomic design
    • CAT IV 300 V/CAT III 600 V safety rating

    Remark  Please identify each quotation when ordering.
    12,817.00 ฿

  7. Fluke 116/62 MAX+

       Combine the power of Fluke's 116 HVAC Multimeter with a Fluke  62 MAX+ infrared thermometer for productive and effective  troubleshooting.
    Fluke 116 HVAC Multimeter
    • Built-in thermometer for HVAC applications
    • Microamps to test flame sensors
    • Low input impedance helps prevent false readings due to  ghost voltage
    • Work in poorly lit areas with the Large white LED backlit display
    • True-rms voltage and current for accurate measurements on  non-linear loads
    • Measures 10 A directly (20 A overload for 30-seconds) without  a current clamp
    • Resistance, continuity, frequency and capacitance
    • Record signal fluctuations using Min/Max/Average and elapsed  time stamps
    • Easy to use with one hand
    • Hands free operation with optional magnetic hanger (ToolPak™)
    • CAT III 600 V safety rated
    Fluke 62 MAX+ Infrared Thermometer
    • Measure -30°C to 650°C (-22°F to 1202°F)
    • Extremely accurate: up to +1.0°C or + 1.0% of reaching  (Fluke 62 MAX+)
    • IP54 rating for water resistance and dust proof allow you to  work rain or shine and even in the most dirty or dusty industrial  sites
    • Strong enough to withstand a 3m drop. No worry even if you  work from a ladder
    • Small and lightweight; clips to your tool belt or belt loop or easily  fits into your tool box
    • Dual lasers: The 62 MAX+ has dual lasers to help you identify  area to be measured

    Remark  Please identify each quotation when ordering.
    11,421.00 ฿

  8. Fluke 117

    Compact true-rms meter for commercial applications. The Fluke 117  is the ideal meter for demanding settings like commercial buildings,  hospitals and schools. The 117 includes integrated non-contact voltage  detection to help get the job done faste
    Featrures
    • VoltAlert™ technology for non-contact voltage detection
    • AutoVolt automatic ac/dc voltage selection
    • Low input impedance: helps prevent false readings due to  ghost voltage
    • Large white LED backlight to work in poorly lit areas
    • True-rms for accurate measurements on non-linear loads
    • Measures 10 A (20 A overload for 30-seconds)
    • Resistance, continuity, frequency and capacitance
    • Min/Max/Average with elapsed time to record signal fluctuations
    • Compact ergonomic design for one-handed operation
    • Compatible with optional magnetic hanger (ToolPak™) for  hands free operation
    • CAT III 600 V safety rated

    Remark  Please identify each quotation when ordering.
    9,856.00 ฿

  9. Fluke 117/323

    Combine the power of Fluke's 117 Electrician's Multimeter with a  Fluke 323 clamp meter for productive and effective troubleshooting
    Fluke 117 Electrician's Multimeter
    • Fast go/no-go testing with VoltAlert™ non-contact voltage  detection
    • AutoVolt automatic AC/DC voltage selection
    • Low input impedance helps prevent false readings due to  ghost voltage
    • Work in poorly lit areas with the Large white LED backlit  display
    • True RMS voltage and current for accurate measurements  on non-linear loads
    • Measures 10 A directly (20 A overload for 30-seconds)  without a current clamp
    • Resistance, continuity, frequency and capacitance
    • Record signal fluctuations using Min/Max/Average and  elapsed time stamps
    • Easy to use with one hand
    • Hands free operation with optional magnetic hanger  (ToolPak™)
    • CAT III 600 V safety rated
    Fluke 323 True-rms Clamp Meter
    • 400 A AC current measurement
    • 600 VAC and DC voltage measurement
    • True RMS AC voltage and current for accurate measurements  on non-linear signals
    • Resistance measurement up to 40 kΩ with continuity detection

    Remark  Please identify each quotation when ordering.
    15,102.00 ฿

  10. Fluke 123B/INT/S

     The compact ScopeMeter® 120B Series, is the rugged oscilloscope  solution for industrial electrical and electro-mechanical equipment  troubleshooting and maintenance applications. It’s a truly integrated  test tool, with oscilloscope, multimeter and high-speed recorder in  one easy-to-use instrument. The ScopeMeter 120B Series also  integrates with Fluke Connect® mobile app and FlukeView® for  ScopeMeter software to enable further collaboration, data analysis  and archiving of critical test information.

     The 120B Series Industrial ScopeMeter test tools include innovative  functions designed to help technicians troubleshoot faster and get the  answers they need to keep their systems up and running. Display  waveforms with Connect-and-View™ trigger and setup technology and  automatically view related numerical measurements using Fluke  IntellaSet™ technology, all without making manual measurement  adjustments. With Recorder Event Detect capabilities, elusive intermittent  events are captured and logged for easy viewing and analysis.
    Features
    • Dual-input digital oscilloscope and multimeter
    • 40 MHz or 20 MHz oscilloscope bandwidth
    • Two 5,000-count true-rms digital multimeters
    • Connect-and-View™ trigger simplicity for hands-off operation
    • IntellaSet™ technology automatically and intelligently adjusts  numerical readout based on the measured signal
    • Dual-input waveform and meter reading recorder for trending  data over extended periods
    • Recorder Event Detect captures elusive intermittent signals  on repetitive waveforms up to 4 kHz
    • Shielded test leads for oscilloscope, resistance and continuity  measurements
    • Resistance, continuity, diode and capacitance meter  measurements
    • Power measurements (W, VA, VAR, PF, DPF, Hz)
    • Voltage, current and power harmonics
    • Check Industrial networks with BusHealth physical layer tests  against defined reference levels
    • Save or recall data and instrument setups
    • Store instrument setups defined by a test sequence for routine  maintenance or most often used test procedures.
    • External optically isolated USB interface to transfer, archive and analyze scope or meter data
    • Optional WiFi adapter connected to internal USB port to  wirelessly transfer information to the PC, laptop or Fluke  Connect® mobile app*
    • FlukeView® ScopeMeter® Software for Windows®
    • Rugged design to withstand 3g Vibration, 30g shock, and rated  IP51 according to EN/IEC60529
    • Highest safety rating in the industry: safety rated for CAT IV  600 V
    • Li-Ion rechargeable battery, seven-hours operation (with four- hour charge time)

    Remark  Please identify each quotation when ordering.
    100,226.00 ฿